ALL TESTED IN ACCORDANCE WITH THE ABOVE STANDARDS AND DEEMED TO MEET ALL REQUIREMENTS.
- support@goldcoastfastner.com.au
- GET $100 OFF YOUR ORDER - See Our Cash Off Deals
- 1300 794499
Commitment to Quality
Customer Satisfaction
Safety First Approach
Standard Designed
Hot Dip Galvanized – Category 4
Drive Type: Hex 3/8
Base Material Thickness : 0.75-5.00mm Steel
One piece washer assembly for both Corrugated and Square Rib Roofing Sheet profiles
Hot Dip Galvanized – Category 4
Drive Type: Hex 3/8
Base Material Thickness : 0.75-5.00mm Steel
One piece washer assembly for both Corrugated and Square Rib Roofing Sheet profiles
Products conform to the structural requirements of the National Construction Code Series (NCC) and the relevant Australian Standards:
Part 0: Introduction, list of methods and general requirements
Method 3: Methods of testing sheet roof and wall cladding – Resistance to wind pressures for cyclone regions, pressure test regime as per BCA Low-HighLow pressure sequence.
ALL TESTED IN ACCORDANCE WITH THE ABOVE STANDARDS AND DEEMED TO MEET ALL REQUIREMENTS.
1. Report return requests within 14 business days of receiving your purchase.
2. Include the invoice, packing slip, or proof of purchase with your return request.
3. Please allow 14 business days for the processing of damaged or missing items.
4. The return is accepted within 14 days of delivery date in their original sealed packaging. In case the customer returns due to change of mind, a re-stock fee equal to 15% applies.
5. It is not possible to claim back the shipping charges that originally incurred to ship the item to the customer. It will be at the cost of the customer returning it.
6. Any exchange has to be of the same or lesser value; otherwise, some extra charges will be applicable as well.
7. Once the order is ready for dispatch, any change of mind by the customer will result in a 25% packing and admin fee being applied.
Hot Dip Galvanized – Category 4
Drive Type: Hex 3/8
Base Material Thickness : 0.75-5.00mm Steel
One piece washer assembly for both Corrugated and Square Rib Roofing Sheet profiles
Hot Dip Galvanized – Category 4
Drive Type: Hex 3/8
Base Material Thickness : 0.75-5.00mm Steel
One piece washer assembly for both Corrugated and Square Rib Roofing Sheet profiles
Products conform to the structural requirements of the National Construction Code Series (NCC) and the relevant Australian Standards:
Part 0: Introduction, list of methods and general requirements
Method 3: Methods of testing sheet roof and wall cladding – Resistance to wind pressures for cyclone regions, pressure test regime as per BCA Low-HighLow pressure sequence.
ALL TESTED IN ACCORDANCE WITH THE ABOVE STANDARDS AND DEEMED TO MEET ALL REQUIREMENTS.
1. Report return requests within 14 business days of receiving your purchase.
2. Include the invoice, packing slip, or proof of purchase with your return request.
3. Please allow 14 business days for the processing of damaged or missing items.
4. The return is accepted within 14 days of delivery date in their original sealed packaging. In case the customer returns due to change of mind, a re-stock fee equal to 15% applies.
5. It is not possible to claim back the shipping charges that originally incurred to ship the item to the customer. It will be at the cost of the customer returning it.
6. Any exchange has to be of the same or lesser value; otherwise, some extra charges will be applicable as well.
7. Once the order is ready for dispatch, any change of mind by the customer will result in a 25% packing and admin fee being applied.
